Vintage Tascam PA-150 Dual Power Amplifier Protection Circuit 150W

Description

Vintage Tascam PA-150 Dual Power Amplifier  Protection Circuit 150W
Every personal, project or major recording studio needs power. And when it comes to monitoring signals from mixers, MIDI equipment and other gear, you need to power those nearfield or studio monitor speakers. Clean sound, space consciousness, high-performance and flexibility are your criteria. And that's exactly what makes the TASCAM PA-150 an ideal fit for personal and project studios or for major studios looking for a high-value power amp for a B suite or off-line editing room. With its dual power, switchable stereo/mono design, it excels in control room and recording studio applications Whether powering single speakers, stereo pairs or bridged series. As with all TASCAM studio equipment, the PA-150 is built to last and will provide years of trouble free operations. With semiconductor circuitry, a convection-cooled heat sink and a rugged power transformer, the PA-150delivers up to 150W per channel of pristine sound in a compact 2U, rack mountable design.
You won't have to worry about using the PA-150 today or tomorrow. With both balanced and unbalanced connectors, it will easily integrate into any studio. The back panel inputs are optimized for +4 dBm and -10 dB V levels, minimizing gain staging to a single front panel sensitivity control. Also on the rear panel, is a stereo/BTL mode selector switch that enables you to take advantage of the PA-150 Dual Power Design. That means it can be used to pump out stereo or mono signals. Of course, solid speaker wire terminals are well labeled and make it easy to set up for bridged mono or stereo use. Setup is quick and simple.
The PA-150 sounds great and delivers 150W per channel at4 ohms or 115W per channel at 8 ohms. And with an extremely flat frequency response of 20Hz-20kHz at less than .08% THD, it delivers a clean, transparent signal perfect for recording studio monitoring applications. And while the PA-150 packs enormous headroom, you'll be pleased to know that it will warn you if your signals get too hot with its bright LED clip indicators for each channel.
¥ Stereo/BTL mode select switch
¥ Balanced and unbalanced inputs
¥ 150W per channel at 4 ohms
¥ 115W per channel at 8 ohms
¥ Accepts balanced XLR or 1/4" jacks
¥ Connect your speaker wires for stereo or bridged mono use
¥ Power indicator turns red whenever the PA-150 is protecting
Output Power (Volume: MAX) Nominal Limit:
20Hz-20kHz, 8W, 0.08% THD Stereo 105W x 2 100W x 2
20Hz-20kHz, 4W, 0.6% THD Stereo 150W x 2 140W x 2
1kHz, 8W, 0.4% THD BTL310W 300W
This is a tested and fully working unit. It was also cleaned inside for dust build up. It is very powerful and has great sound. Solid steel case for rack mount.
This item carries invisible security markings.
If you are not satisfied with this purchase, contact me within 14 days of receiving this and I will give a full refund.
I ALWAYS DO COMBINED SHIPPING.
ATTENTION: The Rates for CANADA and INTERNATIONAL are NOT accurate and in some cases MUCH LOWER then quoted. Please contact me for a more accurate rate.
Thank You.
PLEASE SEE ALL PICTURES
If you like what you see, please place bid.
Satisfaction Guaranteed!
Please E-mail if you have any questions.
RETURNS -- Please contact me with any issues before initiating a return or leaving negative feedback, as I am reasonable and willing to help resolve any issues.
I have a 100% feedback rating and care very much about keeping it that way. I treat all fairly and efficiently. Thank you very much for looking at this listing.