Technics SE-A1000 MKII Amplifier & SU-C1000 MKII Pre Amp -True Hi-Fi System

Description

These units may not be in impeccable condition but the sound they produce is on another level. I am an audio engineer by trade. I truly appreciate quality sound and I loved coming home and putting on some tunes through this system. Both units have some scratches, there is a chip in the Technics tag on the amp. All the lights on the Amp are brand new, the meter works flawlessly, check out the pictures they are of the actual amp & pre-amp you will receiving. I do not have the remote, but will be including power cables for each unit.
INFO ON SE-A1000 MKII
Stereo power amplifier which adopted the MOS class AA circuitry.
The MOS class AA circuitry original with technics is adopted as SE-A1000MK2.
In this circuitry, it has composition which combined the pure Class-A voltage control amplifier which used MOS FET which controls an output-terminal, and the current-supply-source amplifier using the Bipolar transistor which supplies an electric current to a speaker on the Class AA bridge. For this reason, the amplification of input voltage and the current supply source to the speaker were taken charge of with separate amplifier, and the effect of the Class AA bridge has protected the tone-quality failure by the counter-electromotive force of a speaker.
The newly developed bamboo IBM-PCN-II electrolytic capacitor is adopted as an electrolytic capacitor.
This capacitor is what upgraded the electrolytic capacitor which adopted the separator which blended the bamboo fiber, equips the sheath part of an aluminum electrolytic capacitor with spiral-like copper wire, and is fixing it with the polyolefin sleeve while it raises the combination rate of a bamboo fiber. This has improved the electric and mechanical performance.
The input terminal carries two kinds, Direct and Normal with a level volume.
The large-sized meter which can carry out a Direct reading from the minute signal of 0.001W is carried.
Moreover, the back panel is equipped with the switchpoint which turns on and off the illumination of a power meter.
The OCC wire rod is adopted as internal-wiring material.
The mass OFC power cord with a polar window is adopted.
The input terminal in which gilding was given is adopted.
The speaker termination corresponding to a banana plug is adopted.
INFO ON SU-C1000 MKII
Control amplifier which adopted the battery drive system.
The nickel-Cd battery is adopted as the power source for audio circuitries, and the noise of a power circuit is reduced sharply.
this battery is x8 type only for in-series, and can exchange from a front. Moreover, if it discharges, it will change to the usual power source automatically, and the battery is designed become condensation mode.
The high-quality sound electrolytic capacitor using the separator which blended the bamboo fiber is adopted as a power source capacitor.
This capacitor has blended the bamboo fiber with the separator which influences an electric and a mechanical property, and is reducing equivalent-series-resistance components.
The core cross section has adopted circular R core transformer as a power transformer, and the leakage of the slight magnetic flux from a transformer is reduced.
The ill effect to a tone quality is eliminated by giving silver palladium / golden cladding to the contact of the relay for an input switching.
The hybrid material of the increased specific gravity excellent in vibration suppression nature is adopted as the front panel.
The wired remote control termination in which power-source ON/OFF of power amplifier SE-A1000mk2 is possible is carried.
In order to correspond to a by amplifier drive, two pre output-terminals are carried.
The OFC power cord with a polar window is adopted.
The input/output terminal to which gilding was given is adopted.
The OCC wire rod is adopted as internal-wiring material.
The system remote control which can control the compact disk player of technics, a cassette deck, and a tuner is attached.