Sansui AU-717 Audiophile Amplifier (Pro Restored/Benches 110WPC!) + TU-717 Tuner

Description

*LOCAL PICK UP PREFERRED*
For sale:
(1) Sansui AU-717 Integrated Amplifier (Professionally Restored — Scroll Down For Restoration Details) — unit was tested using an oscilloscope with a 1kHz signal — results: 110WPC output without any clipping! BEASTLY!
(1) Sansui TU-717 Tuner
Condition: excellent; from a non-smoking home; always loved and never abused. Selling as a set — I will not separate. Scroll down for disclosure and specs.
Important Disclosure: I have described my gear for sale with the utmost accuracy — it is in great working order and ready to be enjoyed. The integrated amp had been professionally restored and is ready to be enjoyed for many, many years to come. The tuner is in good working condition, and pulls in radio stations with ease. That being said, vintage audio gear must be maintained and will likely require basic servicing at some point in the future.
NO RETURNS.
Local pick up only in Northridge, CA (91330).
Sansui AU-717 — Restoration Details:
Sansui AU717 SN227062454
*Note* Previous repair to Power Supply noted (failed Capacitor, burnt wires replaced)
F2721 (Driver, Left Channel)
Removed all capacitor glue
Replaced Capacitors
C11, C02, C12, C14, C04
Remove, clean, test and replace with new insulators and Silicon based thermal grease
TR12, TR13, TR701, TR703 (transitors)
F2722 (Driver, Right Channel)
Removed all capacitor glue
Replaced Capacitors
C14, C04, C11, C12, C02
Replaced D02 diode (contaminated with glue)
Replaced R15, R29 (contaminated with glue)
Remove, clean, test and replace with new insulators and Silicon based thermal grease
TR12, TR13, TR702, TR704 (transitors)
F2670 (Pre-Main Switch Control Board)
Replaced Capacitors
C01, C03, C05, C06
Deoxidized selector switch and reapplied Cleaner/lube
Relaced 4 push pin retainers
F2723 (EQ Circuit Board)
Replaced Capacitors
C27, C29, C05, C31, C33, C19, C30, C28, C06, C20
Replaced Varistors with 2x 1N4148
D01, D02, D03, D04
Replaced out of spec metal film fuse resistors
R47, R48, R49, R50
Cleaned and lubed selectors switches
F2720 (Tone Circuit Control Board)
Replaced Capacitors
C16, C22, C46, C40, C41, C39, C28, C30, C27, C29, C15, C21, C45, C34, C36, C33, C35
Replaced Varistors with 2x 1N4148
D01, D02
Cleaned and lubed switches
F2663 (Power Supply Board)
Removed all Capacitor glue
Replaced Capacitors
C23, C25, C19, C17, C07, C605, C601, C07, C606, C12, C08, C18, C10, C06, C604, C29, C30
Replaced Varistors with 2x 1N4148
D604, D609, D610
Replaced Diodes due to corrosion
D005, D007, D11, D14, D09, D601, D602, ZD01, ZD02, D10, D12, D08, D09
Replaced Resistors due to corrosion
R07, R009, R11, R13, R14, R34, R12, R10, R08
Replaced Transistors due to corrosion
TR05, TR12
Replaced Speaker Relay
Replaced 4 filter capacitors C701, C702, C703, C704
Cleaned all switches, controls and pots.
Cleaned chassis
Cleaned connectors
Adjusted DC offset and Bias (bias = 20mV)
Sansui AU-717 — SPECS:
Description:
The AU-717 amplifier incorporates an advanced design feature which has extremely low inherent transient intermodulation distortion enabling negative feedback (necessary in traditional amplifier design but undesirable) to be reduced to the absolute minimum.
Power amplifier design too, shows a departure from tradition resulting in the elimination of DC drift.
Differential push/pull amplifier stage eliminates open-loop distortion. The driver stage is 3-stage darlington connected.
Specifications:
—Power output: 85 watts per channel into 8Ω (stereo)
—Frequency response: 20Hz to 20kHz
—Total harmonic distortion: 0.025%
—Damping factor: 60
—Input sensitivity: 2.5mV (MM), 150mV (line)
—Signal to noise ratio: 78dB (MM), 100dB (line)
—Channel separation: 60dB (MM), 65dB (line)
—Output: 150mV (line), 1V (Pre out)
—Speaker load impedance: 8Ω (minimum)
—Dimensions: 430 x 168 x 389mm
—Weight: 17.8kg
—Year: 1978
Sansui TU-717 — SPECS:
Description:
The TU-717 is a high technology AM/FM stereo tuner made to match the most sophisticated amplifier.
It features a sensitive front end and a dual bandwidth IF section with selector switch for either lowest distortion or highest selectivity.
Specifications:
—Type: Mono/Stereo Tuner
—Tuning Bands: FM, MW
—Tuning Scale: Analogue
—FM Tuning Range: 88 to 108 MHz
—MW Tuning Range: 530 to 1600 kHz
—Sensitivity: 1.7uV (FM), 220uV (MW)
—Signal to Noise Ratio: 78dB (FM), 52dB (MW)
—Distortion: 0.25% (FM), 0.35% (MW)
—Selectivity: 80dB (FM), 35dB (MW)
—Frequency response: 30Hz to 15kHz (FM)
—Output: 1000mV
—Dimensions: 402 x 430 x 168mm
—Weight: 9.2kg