Pioneer SA-8100 Complete Rebuild Kit High-Quality Amplifier Recap Transistors

Description

Up for sale here is this rebuild kit for a Pioneer SA-8100.  This includes all the parts you need to rebuild the Pioneer SA-8100 power supply board, protection board, amplifier board, phono EQ board, preamp board, two switch boards, and filter amp board, plus it includes upgraded replacement main capacitors and a new relay.  This does not include new fuses or output transistors.  The correct replacement output transistors are two MJ21193G (replaces 2SB530) and MJ21194G (replaces 2SD370), available
here
.  Please do not buy any of the fake "Made in Japan" Chinese output transistors listed on eBay--these are counterfeit and will damage your amp.
This kit includes the following:
Power Supply Board:
10 capacitors
10 diodes
4 transistors
Protection Board:
4 capacitors
7 transistors
Amplifier Board:
14 capacitors
14 transistors
Phono EQ Board:
11 capacitors
8 transistors
Preamp Board (there are 2 different versions of this board, and the kit has enough parts for either one):
13 capacitors
8 transistors
Filter Amp board:
6 capacitors
2 transistors
Switch Boards A & B:
8 capacitors
2 transistors
2 new main capacitors (same diameter as the old caps so they will fit the clamps, upgraded uf/voltage rating)
Relay w/standoffs
Instructions
The kit for each board is bagged individually to make things easier.
These are all high-quality brand new genuine parts.  The main capacitors are Nippon Chemi-Con 10000 uf 80v capacitors, the other capacitors are 105° Panasonic FC, Nichicon PW, Nichicon KL, and Wima film caps at the same uf ratings and the same or higher voltage ratings, the transistors and diodes are the correct Fairchild/Onsemi subs for the original transistors, and the relay is a new Omron relay.  These are not cheap Made in China parts, they are extremely high-quality and they are what I use when I rebuild Pioneer equipment.
I will include surprisingly well-written instructions, but rebuilding an amplifier is moderately complicated, and you should know what you're doing and have a decent soldering iron, heat-sink compound, and a dim-bulb tester with a 60W or 100W incandescent bulb.  Please see my pictures for details.
US shipping and handling is , and international is .  If you have any questions, please ask.
Looking for more parts?  I have
power switches
,
feet
,
pushbuttons
,
top case screws
,
bottom screws
,
faceplate screws
,
white LED fuse lamps
,
blue LED fuse lamps
,
6.3v bi-pin bulbs
,
8v bi-pin bulbs
,
12v bi-pin bulbs
,
wired 8v 60ma bulbs
,
new power cords
,
new main capacitors for the Marantz 1060/2230
,
wired Pioneer speaker plug replacements
,
new 630v yellow film capacitors at 13 different values
,
a large variety of transistors for vintage stereo repair,
and more.  Just use "add to cart" on everything you want and then check out for combined shipping.