-40%

Pioneer SA-7500 Stereo Amplifier, Pro Serviced, Recapped, Upgraded, Refinished

$ 421.87

Availability: 11 in stock
  • Modified Item: Yes
  • Featured Refinements: Pioneer SA
  • Model: Model SA-7500
  • Modification Description: Upgraded capacitors
  • MPN: Model SA-7500II
  • Condition: Professionally serviced, recapped and fully refurbished. Please read complete shop notes in description. All functions tested and passed, unit expected to perform reliably at or exceeding original spec. Cosmetically excellent, case refinished, no significant issues.
  • Brand: Pioneer
  • Type: Integrated Amplifier
  • Item must be returned within: 30 Days
  • Custom Bundle: No
  • Return shipping will be paid by: Buyer
  • All returns accepted: Returns Accepted
  • Restocking Fee: No
  • Refund will be given as: Money Back
  • Country/Region of Manufacture: Japan

    Description

    Professionally serviced Pioneer SA-7500 2-channel integrated stereo amplifier. Completely refurbished, capacitors upgraded, all functions tested and passed. Expected to reliably meet or exceed original spec. Includes inputs for two turntables, a tuner, auxiliary source and two tape loops.
    Notes from the technician -
    Initial Assessment:
    Intermittent output
    Hum from P.S.
    Cracked solder joints on voltage regulators and some input connectors
    Sticky AC switch
    Corroded fuses
    Check relay, resistor temp, P.S. voltage, ESR main filters, soldering, fuses
    Clean switches and controls
    Junction test transistors
    Final calibration
    Tightened fuse holders and replaced fuses
    Upgraded 60% secondary P.S. caps
    Replaced audio caps on amp board -
    Replaced .47UF coupling caps with 1UF monolythics for improved impulse response
    Replaced all bypass (gain) caps with slightly improved capacitance valve to improve freq response
    All low ESR high temp Nichicon capacitors used
    Inspected contacts for arc spots and corrosion
    Buffed relay contacts and applied R100 finishing oil to preserve metal on metal contact and long term reliability
    Tightened relay fronz for improved tension
    Closely inspected amp and P.S. board for overheated resistors
    Resoldered 10 - 15 suspect joints
    Replaced third order filter capacitors
    Cleaned and exercised all switches and controls x2, applied R100 for long term reliability
    Applied switch lube to all switches and freed gummed up mech
    Cleaned and exercised AC switch with Deoxit
    Final calibration and test -
    Checked bias, DC offset, ran phono for 2 hours
    From the owner's manual:
    Specifications -
    Power output: 40 watts per channel into 8Ω (stereo)
    Frequency response: 10Hz to 50kHz
    Total harmonic distortion: 0.3%
    Damping factor: 25
    Input sensitivity: 7.5mV (mic), 2.5mV (MM), 150mV (line)
    Signal to noise ratio: 65dB (mic), 70dB (MM), 90dB (line)
    Output: 150mV (line), 30mV (DIN), 1V (Pre out)
    Semiconductors: 2 x FET, 35 x transistors, 21 x diodes
    Ships worldwide, through eBay's Global Shipping Program, or local pickup can be arranged. Package will be large, heavy, delicate, and insured for the full declared value, so shipping may be a significant expense.