Marantz 1030 Complete Rebuild Kit High-Quality Amplifier Recap Transistors

Description

Up for sale here is this complete rebuild kit for a Marantz 1030 amplifier.  This includes all the parts you need to rebuild the Marantz 1030 power supply board, amplifier board, phono EQ board, and preamp board, plus it includes upgraded replacement main capacitors, a new blue LED, and a new power switch with snubber capacitor.  This does not include new fuses or output transistors.  The original output transistors are 2SD315, and can either be replaced with NTE175 transistors (available on eBay) or with TIP41C transistors, which have a different package but can be fitted fairly easily.  I have those available
here
.  Please do not buy any of the fake "Made in Japan" Chinese output transistors listed on eBay--these are counterfeit and will damage your amp.
This kit includes the following:
Power Supply Board:
4 capacitors
2 diodes
1 transistor
Amplifier Board:
14 capacitors
6 transistors
4 trimmers
Phono EQ Board:
9 capacitors
4 transistors
Preamp Board:
11 capacitors
6 transistors
3 new main capacitors (same diameter as the old caps so they will fit the clamps, upgraded uf/voltage rating)
Power switch w/ snubber capacitor & knob
Wired blue LED (I can substitute an incandescent bulb if you prefer, just let me know)
Instructions
The kit for each board is bagged individually to make things easier.
These are all high-quality brand new genuine parts.  The main capacitors are one Nichicon LS 6800 uf 80v cap and two Epcos 4700 uf 50v capacitors, the other capacitors are 105° Panasonic FC, Nichicon PW, and Wima film caps at the same uf ratings and the same or higher voltage ratings, and the transistors and diodes are the correct Fairchild/Onsemi subs for the original transistors.  These are not cheap Made in China parts, they are extremely high-quality and they are what I use when I rebuild Marantz equipment.
I will include surprisingly well-written instructions, but rebuilding an amplifier is moderately complicated, and you should know what you're doing and have a decent soldering iron and a dim-bulb tester with a 60W or 100W incandescent bulb.  Please see my pictures for details.
US shipping and handling is , and international is .  If you have any questions, please ask.
Looking for more parts?  I have
power switches
,
feet
,
pushbuttons
,
top case screws
,
bottom screws
,
faceplate screws
,
white LED fuse lamps
,
blue LED fuse lamps
,
6.3v bi-pin bulbs
,
8v bi-pin bulbs
,
12v bi-pin bulbs
,
wired 8v 60ma bulbs
,
new power cords
,
new main capacitors for the Marantz 1060/2230
,
wired Pioneer speaker plug replacements
,
new 630v yellow film capacitors at 13 different values
,
a large variety of transistors for vintage stereo repair,
and more.  Just use "add to cart" on everything you want and then check out for combined shipping.