EL84 Output transformer,Push-Pull, ultralinear ,10W (Pair)

Description

10W,Wide bandwidth, push pull Output transformer
(Pair),Ultralinear
Designed for EL84-6BQ5-ECL86-ECL82-6V6 push-pull
amplifiers
TECHNICAL FEATURES:
Primary Impedance: 10K (Anode to Anode)
Secondary Impedance: 4/8 Ω
ultralinear taps : 50%
Primary Inductance Lp=133H @17Vrms/50hz
Leakage inductance : 6mH
Primary Dc resistance: 186 Ohm
Max Dc current per tube :120mA (Anode to CT)
Maximum output power 10W
Frequency Response:  8hz-54Khz -3bB at 1W output
power.
Lead wire lengths: 400mm
color code of lead wires
White :Anode 1
Black:Anode 2
Red  :B+
Gray  :Ultralinear1
Orange:Ultralinear2
Brown :0
Yellow:4 Ohm
Green :8 Ohm
core material: high quality , low loss silicon
steel  made in Europe.
core size :EI60/30.
lamination thickness: 0.50mm
dimensions: 62mx51.5mmx55mm (86mm foot distance)
footprint hole 5x6mm
weight: 750gr
Winding Wire:
Double coated Grade 2 enamelled copper wire
Wound in Precision  Multi section winding, for
reduced leakage inductance and high dielectric
strenght.
Mounting: c cage clamp suitable for vertical or
horizontal placement. Please note that Horizontal
placement is for underchassis, side mounting
position only.
All transformers are tested in real working tube
amplifiers before shipping
On request we can make different primary
/secondary impedance ratio or secondary winding
for 4/8/16Ω
For further technical info/ questions,
communication is always welcome.
Tube amplifier projects and related circuits use
high voltage and contact with high voltages can
cause serious injury or death. If you are not
experienced with high voltage safety and working
with high voltage, this is not the project for you
and you act at your own risk and responsibility.