CARVER M-1.5 & PM-1.5t Dual 50/80 V *Complete* Capacitor replacement Kit

Description

The Carver
M-1.5 and M-1.5T amplifiers used two Dual Capacitors for the Low Voltage Rails. These capacitors had a 50v / 80v rating respectively.  These Dual Capacitors are No Longer made, and No longer available.
This PCB solution provides a quick and easy way to replace these aging capacitors with newer, easily available, and better rating capacitors. For best results using this PCB kit, I have provided you the following capacitors:
C1, & C3   Nichicon   UVR2A222MRD   2200uf   100V
C2 & C4    Nichicon   UPW1J222MHD   2200uf    63V
These capacitors are available from Mouser & Digi-Key and usually in stock!  You can use other brands, but you will want to check the lead spacing, lead diameter, and part diameter compared to the Nichicon parts for best results.
This Complete DCR-1A kit includes:
1  Low Voltage Rail capacitor PCB
.
2  2200uf  100V caps
2  2200uf   63V  caps
4  Straight Pins.
1  Detailed 8 Page Instructions with Color Photos.
The hardest part of doing this project is the de-soldering of the OLD dual capacitors. There are 16 solder points that will need to be de-soldered in order to remove the OLD caps. You will only be using 8 of the holes for re-assembly!
The PCB was designed so that your re-assembly is quick and easy!!!