Bedini/Strelioff 200/200 Model 1/Dual Channel Amplifier

Description

Bedini/Strelioff 200/200 Model 1/Dual Channel Amplifier. Condition is "Used".
This is a working Bedini/Strelioff amplifier in good condition. The RCA inputs have been replaced, and the 1/4 inch inputs have been disconnected. Three of the fuse holders on the back have been replaced. No other work has been performed on the amp.
The amp has a very low hum when no music is being played,  but the hum is not audible when music is playing.
This is a description of the amplifier from
https://emediapress.com/johnbedini/icehouse.net/john1/index001.html
This amplifier used the first
feed forward
dual diff-amp front end. the output stage was a
quasi-complementary
design, John Bedini and Jack Strelioff were the first amplifier company to do it with this new design you could split the sing wave into a plus and minus and put it back together again in the output , with decreased distortion. These  amplifiers in the 70'swere the first to drive the Infinity
QSL
loudspeaker systems at ear- busting levels of over 450 watts RMS. The Amplifiers were in a "
Pull out Modules
" (as can be see from the picture) The front panel included , over tempeture lights and fuse lights,and a  power indictor. The output transistors that were used were the
RCA 1B05's
. the circuit boards were mounted inside the modules connected by Molex connectors. The company lasted for about 3 years, then John and Jack split up the partnership to go their separate ways.