-40%

Audiophile Grade Gold Contact Output Relays to repair CARVER TFM-24 25 35 35X 55

$ 15.81

Availability: 100 in stock
  • All returns accepted: ReturnsNotAccepted

    Description

    Audiophile-Grade, Gold Contact
    replacement output relays for CARVER
    TFM-22, TFM-24, TFM-25, TFM-35, TFM-35X, TFM-55, TFM-55X, HR-772 and others. (The original part typically used was JR1AF-DC24V, which is no longer manufactured). In the Carver amps, the relays are located at RY301 and RY302 on the amp board. In HR-772 receivers, the relays are located at RE902 and RE903. These relays also replace Denon DH2TU 24V, DH24D2-OT/M2 and 2140129001 in Yamaha, Rotel, Denon and many other receivers.
    These Audiophile-Grade relays are available exclusively from Circuits and Concepts, and are not available anywhere else! Relays are UL Recognized.
    If you have noise, intermittent output or complete loss of output of one or both channels, a bad output relay is likely the cause.  These relays are drop-in replacements for the original parts, with specifications that significantly exceed the originals with higher current capacity, lower resistance and improved reliability.  Each Carver amplifier uses two relays, and we recommend replacing both relays at the same time.
    This listing is for a PAIR of RELAYS, so you can replace both relays on your amplifier.
    The parts are brand new and will be shipped in protective packaging.   The listing is for the replacement relays only, not the complete amplifier.
    The parts can be replaced by a person with limited soldering skills. A soldering iron, solder wick and solder are needed to replace the parts. Use standard safety precautions (wear safety glasses, unplug the unit before soldering, etc) when working on your gear.  When you're done soldering, always wash your hands because solder contains lead. Please note that replacing the relays will fix the receiver only if the relay was the problem to start with!
    We offer these additional parts for Carver TFM-25/35/55 amps:
    Capacitor replacement kit to fix power supply problems and improve audio quality:
    http://www.ebay.com/itm/Upgrade-Power-Supply-Capacitors-to-Repair-Refurbish-CARVER-TFM-24-25-35-35X-55-/222548677988?ssPageName=STRK:MESE:IT
    See our other listings for other interesting and helpful electronic solutions!  Shipping is discounted for multiple purchases!  Please send us a message if you have any questions.  We've worked with Carver equipment for over 30 years.  We love classic audio equipment, and want to help you get the most enjoyment out of your system!  We also repair Carver equipment at our location.  Let us know what you need!
    Buyer to prepay with Paypal and pay .75 flat rate for shipping and professional packing (additional shipping cost outside the US).   Positive feedback will be left for successfully completed transaction.